M2 & M3
Our systems of shock absorbers for the anchorage of floating docks are the result of severe tests made in collaboration with important dock construction companies building docks.
M2 / M3 are made assembling two or three Nereide mooring springs cod.
126 by AISI 316 stainless steel plates, screwed with nuts and threaded rods in AISI 316 stainless steel. Our M2 / M3 provide the floating dock with the right degree of elasticity, enhancing considerably the characteristics of endurance and resistance of the anchorage systems built with catenary curves.
They avoid violent yanks by releasing the kinetic energy of the moving dock thus protecting the whole structure.
M2:
Mooring spring for boats up to 80 tons
Max Load for Continuous Use: 3000 kg
M3:
Mooring spring for boats up to 120 tons
Max Load for Continuous Use: 5000 kg
$778.00 USD
Shipping calculated at checkout.
Learn More about M2 & M3
Product Details
Our systems of shock absorbers for the anchorage of floating docks are the result of severe tests made in collaboration with important dock construction companies building docks.
M2 / M3 are made assembling two or three Nereide mooring springs cod.
126 by AISI 316 stainless steel plates, screwed with nuts and threaded rods in AISI 316 stainless steel. Our M2 / M3 provide the floating dock with the right degree of elasticity, enhancing considerably the characteristics of endurance and resistance of the anchorage systems built with catenary curves.
They avoid violent yanks by releasing the kinetic energy of the moving dock thus protecting the whole structure.
M2:
Mooring spring for boats up to 80 tons
Max Load for Continuous Use: 3000 kg
M3:
Mooring spring for boats up to 120 tons
Max Load for Continuous Use: 5000 kg
Measurement
Reviews
M2 & M3
Our systems of shock absorbers for the anchorage of floating docks are the result of severe tests made in collaboration with important dock construction companies building docks.
M2 / M3 are made assembling two or three Nereide mooring springs cod.
126 by AISI 316 stainless steel plates, screwed with nuts and threaded rods in AISI 316 stainless steel. Our M2 / M3 provide the floating dock with the right degree of elasticity, enhancing considerably the characteristics of endurance and resistance of the anchorage systems built with catenary curves.
They avoid violent yanks by releasing the kinetic energy of the moving dock thus protecting the whole structure.
M2:
Mooring spring for boats up to 80 tons
Max Load for Continuous Use: 3000 kg
M3:
Mooring spring for boats up to 120 tons
Max Load for Continuous Use: 5000 kg
$778.00 USD
Shipping calculated at checkout.
see M2 & M3 in use
Heading
TESTIMONIALS
M2 & M3
Goes up/down with tide
Only Seahorse adjusts for tidal or lake level change.
Safe/easy boarding
Kayaks strap in place for safe boarding and exiting.
Store your kayaks on their side so they don’t fill up with water
Nobody likes to bail out kayaks before use.
Keep your dock free of kayaks and paddle boards
Store your watercraft where they are out of the way but readily accessible.
Extra wide cradles
Our 36” wide cradles provide ample room; easily fit wider watercraft.
THE BENEFITS OF OUR MOORING SYSTEMS
Always Taut Lines, Regardless of Tide
Ensures your boat stays securely fastened even with changing tide levels and wave action.
Quicker & Easier Tie-Ups
Fast, hassle-free mooring with no need for complex line configurations or adjustments.
Protects from Damage
Eliminates boat damage caused by misaligned fenders or rough wave action.
Strong, Durable Materials
Built from marine-grade stainless steel and durable polymers, ensuring long-lasting performance.
Quiet and Sleek Design
Reduces noise while offering a clean, polished look compared to other systems.
M2 & M3
Full Range of Movement
The flexible belts allow movement in all directions, preventing stress from wave action.
Reduces Stress on Dock & Bracket
Prevents damage caused by twisting and torquing forces, increasing dock and bracket lifespan.
Quiet, Noise-Free Operation
Eliminates the squeaking and noises associated with traditional dock brackets.
Heavy-Duty Durability
Built with power belts that withstand harsh marine conditions, offering long-lasting performance.
Versatile Mounting Options
Suitable for attaching floating docks or jet ski ports to bulkheads, seawalls, or pilings.
KAYAK LAUNCH & STOW
Finally, a better way to store your kayak(s), paddle board(s) or canoe(s) on your dock yet out of the way.
• Only launch system that takes up no dock space
• Stores kayaks, canoes, and boards on their side so they won’t collect water
• Only launch system that goes up and down with the tide so you can easily return onto the cradle
• One or two craft models available
• Top ladder rungs fold up for safe entry & exit at high or low tide
• Strap system secures craft for safe easy boarding; optional handrails also available
• Winch system lets you raise cradle up and out of water for long-term storage
• Designed to support 450 pounds
• Extra wide cradles; 36 inches
• Works with Jet Dock, Dock Blocks, EZ Dock & Wave Armors along with standard wood/aluminum fl oating docks
ROUGH RIDER™
Sliding Cleat-On-Rail Tie-Down System rides up and down with the tide or wave action to always ensure taut lines!
The patent-pending ROUGH RIDER™ mooring system allows for quick and easy tying up of your vessel. The easy-to-install system consists of a series of polymer "cleats" that ride up and down stainless rods which allows you to tie your boat up tight.
This means you can position your boat where you want to instead of centering it in the slip. It also eliminates the need for spring/slack/criss-cross lines
ROUGH RIDER™ neutralizes wave-caused “bucking” of moored boats; eliminates the need for spring lines, slack lines and crisscross lines; no need to center the boat in a slip
How ROUGH RIDER™ compares to the competition
1. Quieter Our noise-dampening spring eliminates any sound of the cleat bouncing on the mounting bracket
2. Stronger Our one-piece 316 stainless flat bar is laser cut, machined and bent vs. their two-piece angle iron; our bracket is welded on both sides vs. their butt-welding on just one side.
3. Sleeker Our pacified welds look cleaner, more finished than their sandblasting.
And, we are competitively priced, too!
TIDE RIGHT
Tide-Adjusting Fender/Cleat System moves up and down with the tide so the fender is always at the height of your boat’s rub rail!
At Seahorse Docking, we’ve solved the age old problem of protecting your boat with fenders where a constantly rising and falling tide is involved. TIDE RIGHT is the only true tide adjusting fender/cleat system. Once you set the fender and cleat to match the level of your boat’s rub rail, the built-in float and the tide do the rest.
• Patented design – the only adjustable, self-leveling fender system
• No need to align boat cleat and piling (as you do with competitive products)
• Simply set fender height to rub rail and Tide Right’s built-in float will adjust with the tide
• Eliminates damage to your boat (from growth on dock pilings) caused by misaligned fenders
• Offers protection to top of piling and from surge or king tides
• Makes for fast tie-offs; ideal for one-side docking
Standard beam length: 10' (12', 14', 16' also available)
Y-beam for mounting to (round) wood pilings • I-beam for mounting to flat surfaces (seawalls)
ROUGH RIDER neutralizes wave-caused “bucking” of moored boats; eliminates the need for spring lines, slack lines and crisscross lines; no need to center the boat in a slip
How ROUGH RIDER compares to the competition
1. Quieter Our noise-dampening spring eliminates any sound of the cleat bouncing on the mounting bracket
2. Stronger Our one-piece 316 stainless flat bar is laser cut, machined and bent vs. their two-piece angle iron; our bracket is welded on both sides vs. their butt-welding on just one side.
3. Sleeker Our pacified welds look cleaner, more finished than their sandblasting.
And, we are competitively priced, too!
FLEX SLIDE™
Flexible Dock Brackets – a better way to attach floating docks or jet ski ports to bulk heads, sea walls or pilings!
Other dock brackets work like a door hinge, moving up and down on just two planes. But, wave action creates twisting and torquing which eventually tears things apart. Flex Slide™ incorporates two heavy-duty, flexible belts into the bracket which allow for full range of movement which dramatically reduces the stress on dock, bracket and piling. This also virtually eliminates the annoying squeaking and obnoxious noises that routinely come with the use of ordinary two-plane hinging dock brackets.
FLEX SLIDE™– a better floating dock bracket!
Exclusive Power Belt Technology™
The key to Flex Slide™'s full range of motion are these two flexible, heavy-duty Power Belts that twist and turn with the torquing caused by wave action. Other hinging dock brackets move only up and down like a door hinge.
Ideal for attaching floating docks or jet ski ports to bulk heads, sea walls or pilings.
PHONE
ADDRESS
80 Sheldon Road
Manchester CT 06042
United States
